DUAL ELECTRONICS CORPORATION XD18BT INSTALLATION & OWNER'S MANUAL Pdf Download (2024)

FAQs

What is the password for dual xd18bt? ›

The Bluetooth passcode is "1234”. Note: If passcode "1234" does not pair your device to the receiver, use passcode "0000". Note: The head unit can be in any mode of operation when pairing is performed. The head unit supports A2DP wireless streaming audio from a Bluetooth mobile device directly to your head unit.

Dual iPlug S is an app designed to control certain Dual brand radios. It can select from 4 different sources; Radio mode, USB mode, Bluetooth music mode and AUX mode via Bluetooth control. - Radio mode on the APP allows you to scan and store radio stations or select your favorite radio station via the radio presets.

To set up Bluetooth connectivity, first, enable Bluetooth on your device and put it in pairing mode. Then, on the DVD player, go to the Bluetooth settings and search for available devices. Select your device from the list, enter any required passcodes, and confirm the pairing.

In order to pair up a device with the “in. stream 2”, you must be able to type in the custom password “5555”. Some Bluetooth transmitters do not allow someone to type in a personalized password so those transmitters can't be paired with the audio station.

Bluetooth should be paired between your smartphone and the receiver. Press the voice activation button, and the receiver will switch into Bluetooth mode, This will activate Siri® or Google Assistant™ on your smartphone.

The reset hole is located under the volume knob of the front panel. With the unit on, press and hold DISP until the clock begins to flash, then release.

If a passkey* is required on the display of the BLUETOOTH device, enter “0000.”

What is Dual audio? Dual audio allows you to send your media audio to two different Bluetooth devices at once. This means that not only can you use two pairs of headphones at one time, but you can share between two different sets of Bluetooth speakers as well.

Dual iPlug for Android is an app for controlling your marine stereo via Bluetooth. This app can operate as a remote controller for certain marine stereo models.

How do I use Bluetooth dual xdm17bt? ›

Bluetooth should be paired between your smartphone and the receiver. Press the voice activation button , and the receiver will switch into Bluetooth mode, This will activate Siri® or Google AssistantTM on your smartphone.

The head unit broadcasts the pairing signal constantly when no devices are connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner's manual for your device for more details. ote If passcode "1234" does not pair your device to the receiver, use passcode "0000".

What's the easiest way to pair my phone with the Dual XRM47BT via Bluetooth? Press the "Bluetooth" button on the unit to activate pairing mode, then access the Bluetooth settings on your phone and select "Dual XRM47BT" from the available devices.

Press the Navi hot button to connect your receiver to your phone through the on-screen UI. Instantly stream audio from your favorite navigation apps on a connected smartphone through your car's reclever vla Bluetooth. Note: A smartphone with date is required to stream navigation.